Options to prevent battery discharge during longer tasks

Several tasks performed with the IIDTool can be done with the engine running (outside). There is no risk of discharging the battery in this case. However, if a task requires the engine to be stopped; the following message will appear: For all vehicles 2010 and + “The engine will automatically shut down.” For all other vehicles: [...]

By |2022-06-09T19:18:40+00:00June 9th, 2022||Comments Off on Options to prevent battery discharge during longer tasks

My FBH/AHCM Auxiliary Heater is not working

First, check for faults. Fuel Prime or Check Operation functions may be required after a long period of inactivity. Only partial diagnosis of the AHCM / FBH was implemented by Land Rover thus available via the OBD port. The Webasto Thermo Test Software grants access to further functionalities and is connected directly to the unit. [...]

By |2022-05-17T14:40:14+00:00May 17th, 2022||Comments Off on My FBH/AHCM Auxiliary Heater is not working

My transmission is not shifting properly. Will an update of its firmware help?

Updating the transmission will help is many cases but there is always a risk when working on a transmission. First, the warnings: The clear adaption routine may cause the transmission to behave erratically over a period of time. It will need a few drive cycles to get back to normal. Drive the vehicle normally and [...]

By |2020-05-14T20:07:13+00:00May 13th, 2020||Comments Off on My transmission is not shifting properly. Will an update of its firmware help?

My IIDTool indicates that many ECU firmware have an update available. How can I update?

Unless there is an issue to fix with the car, we suggest leaving ECUs alone. Else, we can provide them on an individual basis via the fast lane service* Also, the tool already has some embedded in it (vehicle dependent). Please consult the user manual for more details. *No charge for IIDTool Pro owners

By |2022-10-12T18:14:28+00:00May 13th, 2020|, |Comments Off on My IIDTool indicates that many ECU firmware have an update available. How can I update?

Key programming not working on 2009 and earlier vehicles

For these vehicles, only a brand new key will work. Used key programming is not possible. Cheap Chinese keys rarely work thus it is suggested to purchase from a reputable location or a Land Rover dealership. The tool key programming algorithms have proven reliable thus its always key related.

By |2020-05-14T20:11:46+00:00May 13th, 2020|, |Comments Off on Key programming not working on 2009 and earlier vehicles

Key programming not working on 2010+ vehicles

Some KVM ECUs are locked and need some special operations. In which case, please send us your complete ECU Info list as per this video. No screenshot please. Remote key plips frequency will vary depending on market. -433 MHz Europe, Asia, Oceania, UK, UAE and more -315 MHz America, rest of the world Make sure [...]

By |2023-01-30T20:48:11+00:00May 13th, 2020|, |Comments Off on Key programming not working on 2010+ vehicles

Clock On Dash without any inconvenient

GAP Diagnostic modified the 2007 and up instrument pack firmware so that it behaves accordingly on earlier 2004 to 2006 Discovery 3/LR3 and Range Rover Sport. This modification allows adding the clock display without any of the following inconvenient: Auxiliary heater lamp (red indication, left of the information display) turning on when the headlamps are [...]

By |2020-05-13T20:18:45+00:00May 9th, 2016||0 Comments

Instrument pack replacement with a used unit

It is now possible to replace a defective instrument pack with a used unit for the following vehicles: Discovery 3/LR3, All Range Rover Sport, 2005-2009 This feature is only available with an IIDTool. A brand new Instrument Pack unit is required for all other diagnostic tools. Available upon request only.

By |2020-05-13T20:18:52+00:00May 9th, 2016||0 Comments

How do I disable/enable the tire (tyre) pressure monitoring system, TPMS?

On Discovery 3 and Range Rover Sport up to 2009 Remove the wheel sensors and disable the TPMS in the CCF, Menu--Car Config--Body Control. You can also leave the sensors and disconnect the fuse. This will however disable both the TPMS and parking aid (PAM) ECUs. Else, disconnect the TPMS ECU itself  (in the center [...]

By |2023-02-10T14:07:45+00:00September 29th, 2015|, |0 Comments

Title

Go to Top