–Under testing–

This is to enable parallel and perpendicular parking assistance. Part of the Parking Aid system, it uses additional sensors. Not all model year support perpendicular assist.

-Verify that the Park Assist Sensors are installed on the vehicle. There are two in the front bumper and two in the rear bumper. Total of the PAM system with Park Assist is 12 sensors.

For example, the Black vehicle does not have Park Assist Sensors while the Grey one has them.

L494, L405 2014 to 2016

-CCF changes required, Menu–Car Config–Complete List*

  • T5-042 Pdc 10 Channel fitted ( Park Assist)
  • EUCD-059 Parking Assistance PDC (360) – Parking (Parallel, Perpendicular, Exit)
  • MultiCAN-469 PDCAutoActivation –  Default off configurable

-Menu–Service/Test -> PAM-Parking Aid -> CCF Relearn

-Menu–Service/Test–IPMA-Image Processing Module ‘A’–Allow Central Configuration Data Learning

-Menu–Service/Test–IMC-Infotainment Master Controller–CCF Relearn

*Pre-2017, please contact us if access to the complete CCF has not yet been granted

2017+ (under development)

-CCF changes required, Menu–Car Config–Complete List*

  • T5-042 Pdc 10 Channel fitted ( Park Assist) (0x4)
  • EUCD-026 Power Steering Type –  Electric Power Steering with external angle and torque control , only for JLR (may be required)
  • EUCD-059 Parking Assistance PDC (360) – Parking (Parallel, Perpendicular, Exit)
  • EUCD-140 Pdcautoactivationmenu With PDC Auto Activation menu
  • MultiCAN-469 PDCAutoActivation Default OFF configurable
  • MultiCAN-602 PDC 10 Channel fitted ( Park Assist)

-Menu–Service/Test -> PAM-Parking Aid -> Reset CCF Learn

-Menu–Service/Test–IPMA-Image Processing Module ‘A’–Allow Central Configuration Data Learning

-Menu–Service/Test–IMC-Infotainment Master Controller–CCF Relearn